If you are the one looking for best budget headphones or Earbuds out there, you probably have heard the name of Skullcandy Wireless Headphones and Earbuds which by the way did a pretty decent job.
But there is an issue that araises when you have connected too many devices with your Wireless Skullcandy Earbuds and what happens is you can’t connect your device with your Headset.
The simple solution for that is to Reset Skullcandy Wireless Earbuds and that can fix the issue.
These headphones are found at almost every store but when it comes to support, you won’t find much help at the hour of trouble and that’s what is bad about Skullcandy headphones.
Reset Skullcandy Wireless Earbuds
For most models of Skullcandy Earbuds the process is the same, there are some easy to follow steps that will result in resetting the wireless earbuds. Follow these steps to get the job done.
Step 1: Unpair your Wireless Earbuds
To reset your Skullcandy Wireless Earbuds, first you need to unpair your Wireless Headsets. You can do it just by pressing the power button for 7 seconds or another method is to remove your headsets from your devices.
Step 2: Turn them Powered-Off
The second step is to turn them power-off and wait for 5 seconds to make sure they are completely powered off.
Step 3: Reset your Skullcandy Wireless Earbuds
So now you have powered off your earbuds, now press power button for 10 seconds, Done.
Why Reset your Skullcandy Earbuds
If you are facing audio delays, connectivity issues, and pairing issues you should reset your Skullcandy earbuds and they will be up and running fluently. Sometimes it happens and there is no need to panic if you face any of the issues listed above.
Just follow the steps mentioned above and boom, you now have your Skullcandy Earbuds free from all troubles and they will be now in default settings which is a very good thing.
Alternatives of Resetting Skullcandy Earbuds
If you are facing audio delays, you should try to reset your skullcandy earbuds but if you are facing pairing issues, that issue can be fixed. Now there are two pairing issues that arise, one is when you are powered on your earbuds and you’ll hear a sound Connected but actually they aren’t connected with your device.
The thing is that they are connected with some other device which is also paired with it, to fix it simply press the power button for five seconds until you hear sound Pairing, now you can connect the other device.
Another thing you can do is to remove the devices you have paired other than that of which you are trying to connect.
Why my Skullcandy Earbuds are not connecting
If you are facing the issue where you turn your Skullcandy earbuds on, you hear a sound “Connected” you play a song and you won’t hear any sound, it’s because it’s already paired with some other device.
There’s also a case where you connect your earbuds with your laptop and you’ll see both devices are connected with each other but when you play some music, you won’t hear anything. Now this is something for security protocols where your OS won’t allow the audio transfer until you reconnect it from your PC or Laptop.
The article was about resetting skullcandy earbuds and headphones. Most of the time, people wanted to reset their headphones because of pairing issues and that’s not an issue with your headsets, instead it’s because of security protocols of your Operating System.
I’ve faced this issue with Samsung Buds Pro and with many other devices but primarily, MacOS and Debian Based Linux distro are secure and in order to allow the sound protocol you have to reconnect your device and issue will be resolved in a blink.